We are SSL.

Enter DPP Home HOME

Contact   Check Out  GO-Back 


By part
Click for details

   

-8760 + Extension special + Probe (Click the Cyber Deals logo to view the current promotions).

Sherline's 8760 CNC controller + Extended controller box + Digitizing probe. Improves the CNC controller performance!

   

US$ 935.00     FREE SHIPPING (USA main land)

Buy the Sherline PN 8760 CNC controller with an Extended controller Box.

Here is what you get:

1. One Sherline's PN 8760
2. One Extended Box with all the interconnecting cables.
3. One mechanical switch assembly (includes limit/home 5 switches)
4. One Digitizing Prob

The Extended CNC controller box contains signal drivers with Z state buffers that comply with the required IEEE 1284 type A signal level. It enhances the quality of the step and direction signals for a four axis controller and therefore, rectifies issues with parallel ports that provide weaker signals that often causes to miss steps.

In addition, the extended box enables to add up to eight limit/home switches a Digitizing probe and has an expansion port for either an optional CW/CCW variable spindle speed control or 2 additional step and direction signals that can control additional 2 axis for a total of 6 Axises system.

All the inputs and outputs have drivers for lower signal enhancement and furthermore, feature a high Z state for a better isolation for the Sherline controller and the operating computer. The limit switches and the probe inputs pins are not used by the 8760 and therefore, are physically disconnected from it. They are also fully buffered to protect the computer parallel printer inputs.
The unit comes with all the cables and accessories you need to connect swiftly to the Sherline’s 8760 controller.


Three types of switches assembly are available Mechanical (Default.) Digital and Inductive switches are optional. The harness assembly contains five switches (three additional switches are optional). Each switch can be assigned as either a limit or a home switch.

1. Mechanical switches will easily connect to the extended box via the RJ45 cable. The Switches get activated when the moving project will touch them. They are relatively easy to mount onto the XYZ axis. A32 Mechanical Switch Assembly to RJ45

2. Optical switches will easily connect to the extended box via the RJ45 cable.

The switches are very accurate and are activated when a shim is passing through their U shape receptacle and therefore, beam cut the infra red transmitter from its receiver.

Nevertheless, they require an effort to mount them onto the Mill since it is necessary to first install the switches onto the XYZ axis and thereafter to position thin shims on the moving work project so they will cause a beam cut at the switch receptacle when they either reach limit or a home position. To select the optical switches you must contact us 800-621-8334. Optical - Limit SwitchC16 – PHOTO LIMIT & HOME BOARD

3. Inductive switches

A61 Inductive Switch Assembly to RJ45

LIMIT SWITCHS CONNECTOR

RJ45 PIN

DESCRIPTION

1

GND

2

Z HOME/LIMIT

3

Y HOME/LIMIT

4

X HOME/LIMIT

5

NOT USED

6

NOT USED

7

5V

8

NOT USED

The Digitizing probe is mounted to the spindle (Spindle motor is off during the digitizing probe operation) the probe cable connects via a jack connector to the extended box. Various CNC software such as MACH3 and others have a probe wizard which generates a three dimensional G code from the probe contacts. This TP-100 probe can duplicate 3D objects with a reasonable accuracy. Furthermore, the extended box can accommodate a more accurate (and more pricy) probes available at the CNC market. Files being generated by the wizard can also be imported to a CAD software for fine tuning.

Digitizing Probe

The expansion port has an additional step and direction outputs that can control either VFD CW/CCW module for a variable spindle speed control with the existing Sherline's DC motor or be used for a general purpose 5th and 6th stepper motors or relay controls.


8760 + Extension special + Probe Sherline's 8760 CNC controller + Extended controller box + Digitizing probe. <font face="Verdana" size="2" color="#FF0000">Improves the CNC controller performance!</font>