Features

Features Features.

Import AutoCAD DXF files.

Contour.

Pocket.

Dril.

Automatically detects islands and nested islands

Multiple Depths - Islands on top of islands inside boundaries...etc.

Wall Profiles - Any region can have any wall profile

Automatically chains entities into optimised regions

Programmable Post Processor

Automatically vectorizes DXF Text

Add True Type Font Text (comes with a single line TTF) around an Arc etc.

Import 3D STL Prototyping files.

Multiple Passes with Rough or Finishing in the X or Y direction.

Add Margin.

Male or Female toolpath generation.

Import computer image files

Import TIF, GIF, JPEG, PCX, BMP, RLE, ICO, CUR, PNG, EMF, WMF, TARGA, PPM, AVI.

Image Modification.

Invert, Resize (BSpline, Lanczos3 etc.), Crop, Contrast, Brightness, 3x3 Filters, Bump Map.

Wave, Lens, Morphing, Rotate, Reduce Colors etc.

Carving.

Carve with or without cutter comp using End, Ball, or Vee cutters.

Efficient Toolpath Generation with Multiple passes and Margin avoidance.

X or Y raster direction.

View Rendered Carving or Wireframe Toolpaths without swicthing to the 3D Editor.

Engraving

Raster to vector conversion at any color depth.

Built in Topography Engraving at a single depth or Multiple depths.

Point Reduction, Curve Fitting, and Small Region Filtering improves quality of Toolpaths and reduces overall toolpath count.

Import Extended Gerber PC Board format

Import RS274X Extended Gerber and Excellon Drill files.

Route and Drill PCB in one operation.

Spot Drill using Routing Tool.

Board Cut Out when finished.

Machine your part directly from Windows (Using Optional Controller or Controller/Driver).

Uses external Controller Board for timing and Interpolation functions (Option).

Runs smoothly on any system that can comfortably run Windows (95, 98, Me, XP, NT, 2000).

Toolpath location graphically updated in real time and in 3D.

Fast block processing when previewing (more than 50,000 Blocks/sec on a P600).

Fast Block Processing when machine is running (over 300 Blocks/Sec).

User defined jog distances.

True Linear Acceleration Ramp (programmable) throughout the 30 - 40,000 SPS range.

True 3 axis interpolation.

+-8.3 Million step Absolute positioning.

51 move First In/First Out Buffer.

RS232 Intelligent Controller running at 115K Baud.

Continuous Motion Contouring.

Solid part viewing with Gouge Checking using OpenGL.

Mist, Flood, CW, and CCW outputs.

PWM Output for Spindle Speed Control.

Requires same Screw Pitch on X and Y Axis for Circular Interpolation

Requires 9 pin Serial Cable.

Requires 8-20 Vdc external power supply and enclosure.

Integrated 3D GCode Editor...

Integrated 3D Editor with real time zoom, pan, and rotate

Syntax highlighted editor

Step through Toolpath verification

3D Rendered part display.