| |
|
|
Reduced Prices!Sherline's Machine Tool, Packages and Chucks
PART NO. |
PRODUCT NAME AND USE |
WT/LBS |
Buy Now | |
1012 |
Sensitive Drilling Attachment | 1 |
 |
|
1074 |
STEADY REST (Supports the end of long work for center drilling) | .75 |
|
|
1090 |
FOLLOWER REST (Supports thin work, keeps it from deflecting away from the cutter, moves with the lathe saddle to "follow" the work) | .75 |
|
|
1160 |
WW COLLET SET (Metric P/N 1178) (P/N 1161 included in set) (Collets are like small, individually sized chucks for holding a specific diameter tool or material. WW collets have a hole through the collet and drawbar to accept long material. Traditionally used by watch and clock makers. Sherline WW collets have a .312-.313 body size and .275-40 thread.) | .5 |
|
|
1161 |
WW COLLET ADAPTER & DRAWBAR (Included in collet set. Adapts WW taper to #1 Morse taper of Headstock) | .5 |
|
|
1162 |
DELUXE WW COLLET SET (Inch) (17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in wooden case) | 3 |
|
|
1163 |
8.0MM COLLET ADAPTER & DRAWBAR (WW collets vary somewhat depending on manufacturer. This adapter holds those with a .314-.315 body size) | .5 |
|
|
1164 |
(WW) Collet Fixture (Allows WW collets with .312-.313 body to be held on face of rotary table or mill table.) | 1 |
|
|
1165 |
(8 mm) Collet Fixture (Allows WW collets with .314-.315 body to be held on face of rotary table or mill table.) | 1 |
|
|
1171 |
Oak WW Collect Box. Give your WW collects a fitting home. | 1 |
|
|
1179 |
DELUXE WW COLLET SET (Metric) (14 collets, pot chucks, etc. in wooden case. P/N 1161 included in set) | 3 |
|
|
|
1180 |
COMPLETE METRIC WW COLLET SET with 78 collets sized from .3 mm to 8.0 mm by .1 mm increments plus a blank collet. The set is contained in a P/N 1171 oak collet box with 96-hole oak insert. |
4 |
|
|
1182 |
BULLNOSE LIVE CENTER. (Supports tubing or stock with a large end hole when turning between centers. Dual preloaded bearings.) | .75 |
|
|
1185 |
VERTICAL MILLING TABLE (Metric P/N 1184) (Mounts to lathe or mill table to move work up and down. Has 2.25" of vertical travel) | .75 |
|
|
1187 |
CHUCK-TO-T-SLOT ADAPTER (Allows 3- or 4-jaw chuck to be quickly screwed to mill table.) | .05 |
|
|
1191 |
LIVE CENTER (Ball bearings allow center to rotate with part to reduce friction when turning between centers) | .25 |
|
|
1201 |
ADJUSTABLE LIVE CENTER (Ball bearing live center adjusts for perfect centering of headstock and tailstock) | .5 |
|
|
1202 |
ADJUST. TAILSTOCK CHUCK ARBOR (Allows perfect centering of tailstock chuck in relation to headstock) | .5 |
|
|
1203 |
ADJUST. TAILSTOCK TOOL HOLDER (Allows perfect centering of round tools held in tailstock) | .5 |
|
|
1206 |
ADJUST. TAILSTOCK 1" DIE HOLDER w/ 13/16" bushing (Allows perfect centering of 1" or 13/16" threading dies) | .5 |
|
|
1220 |
TAILSTOCK SPINDLE EXTENDER (Designed for lathes built before July, 1996 to extend reach of tailstock spindle over table. Not needed on newer lathes) | .5 |
|
|
1230 |
#0 MORSE ARBOR TO 3/4-16 CHUCK THREAD ADAPTER (Allows a 3- or 4-jaw chuck to be mounted on the tailstock spindle) | .25 |
|
|
1270 |
COMPOUND SLIDE (Redesigned, Replaces P/N 1080) (metric P/N 1280) (An alternate and more traditional way of turning tapers) | 1 |
|
|
1272 |
Compound Riser | .5 |
|
|
1288 |
RISER ROCKER TOOL POST (The riser tool post is used to bring the cutting tool back to lathe centerline height when using a riser block to raise the headstock to turn larger parts. This particular tool post has a convenient "rocker" design that allows adjustment of the tool tip height) | .5 |
|
|
1289 |
RISER 3/8" INSERT HOLDER TOOL POST (A riser tool post is used to bring the cutting tool back to lathe centerline height when using a riser block to raise the headstock to turn larger diameter parts. The riser 3/8" insert tool post holds either a 3/8" square shank insert tool holder or a 3/8" round holder) | .5 |
|
|
1290 |
STEADY REST RISER (Lifts steady rest to match headstock when spacer block is in place. Used mainly by those who leave spacer blocks in place at all times on their lathe.) | .25 |
|
|
1291 |
SPACER BLOCK KIT (Lifts headstock 1.25" to allow parts up to 6" diameter to be turned. Includes extended riser rocker tool post) | 1.5 |
|
|
1292 |
TAILSTOCK RISER BLOCK (Lifts tailstock 1.25" for turning between centers with headstock riser block in place) | 1 |
|
|
1296 |
Cutoff tool riser. | N/A | |
|
1297 |
MILL HEADSTOCK SPACER BLOCK (Same as riser block for lathe, but without tool post. Adds 1.25" of throat distance when milling) | .75 |
|
|
|
1300 |
MILL COLUMN SPACER BLOCK (Raises column base 2" for greater Z-axis clearance. Includes longer bolts for mounting.) |
1.50 |
|
|
2040 |
.7 mm WW COLLET | .05 |
|
|
2041 |
.8mm WW COLLET | .05 |
|
|
2042 |
1/32" WW COLLET | .05 |
|
|
2043 |
.9 mm WW COLLET | .05 |
|
|
2044 |
3/64" WW COLLET | .05 |
|
|
2045 |
HEX AND OCTAGON INDEX BLOCK SET (Fits in mill vise to allow simple indexing of 2, 3, 4, 6 or 8 sides or hole patterns) | 2 |
|
|
2046 |
1.0 mm WW COLLET | .05 |
|
|
2049 |
SPINDLE HANDWHEEL (Used to rotate the headstock spindle much like the large handwheel on a sewing machine is used) | 1.5 |
|
|
2050 |
WW COLLET BLANK (Drill and split yourself to make your own custom collet) | .05 |
|
|
2051 |
1/16" WW COLLET | .05 |
|
|
2052 |
5/64" WW COLLET | .05 |
|
|
2053 |
3/32" WW COLLET | .05 |
|
|
2054 |
7/64" WW COLLET | .05 |
|
|
2055 |
1/8" WW COLLET | .05 |
|
|
2056 |
9/64" WW COLLET | .05 |
|
|
2057 |
5/32" WW COLLET | .05 |
|
|
2058 |
11/64" WW COLLET | .05 |
|
|
2059 |
3/16" WW COLLET | .05 |
|
|
2060 |
13/64" WW COLLET | .05 |
|
|
2061 |
7/32" WW COLLET | .05 |
|
|
2062 |
15/64" WW COLLET | .05 |
|
|
2063 |
1/4" WW COLLET | .05 |
|
|
2064 |
17/64" WW COLLET | .05 |
|
|
2065 |
9/32" WW COLLET | .05 |
|
|
2066 |
19/64" WW COLLET | .05 |
|
|
2067 |
5/16" WW COLLET | .05 |
|
|
2068 |
1.5MM WW COLLET | .05 |
|
|
2069 |
2.0MM WW COLLET | .05 |
|
|
2070 |
2.5MM WW COLLET | .05 |
|
|
2071 |
3.0MM WW COLLET | .05 |
|
|
2072 |
3.5MM WW COLLET | .05 |
|
|
2073 |
4.0MM WW COLLET | .05 |
|
|
2074 |
4.5MM WW COLLET | .05 |
|
|
2075 |
5.0MM WW COLLET | .05 |
|
|
2076 |
5.5MM WW COLLET | .05 |
|
|
2077 |
6.0MM WW COLLET | .05 |
|
|
2078 |
6.5MM WW COLLET | .05 |
|
|
2079 |
7.0MM WW COLLET | .05 |
|
|
2080 |
7.5MM WW COLLET | .05 |
|
|
2081 |
8.0MM WW COLLET | .05 |
|
|
2082 |
WW COLLET (Special Order .050 to .320) (Allow 3 weeks Delivery) | .05 |
|
|
2083 |
WW COLLET 1" BLANK (Make your own custom tool holder or collet that is held with the WW adapter and drawbar) | .15 |
|
|
2085 |
WW COLLET TAILSTOCK ADAPTER (Use with P/N 1203) (Allows WW collets to be held in the tailstock) | .25 |
|
|
2086 |
8mm COLLET TAILSTOCK ADAPTER (Use with P/N 1203) | .25 |
|
|
2090 |
8.0mm COLLET TO 3/4-16 THREAD (For mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 8.0mm collets) | .5 |
|
|
2091 |
10mm "D" COLLET TO 3/4-16 THREAD (For mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 10mm D collets) | .5 |
|
|
2092 |
8.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 8.0mm collets) | .5 |
|
|
2093 |
10.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 10mm D collets) | .5 |
|
|
2094 |
CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to Morse #1 (Arbor for use on watchmaker or jeweler's lathes to hold round gear cutter. Not for use on Sherline lathe) | .5 |
|
|
2095 |
CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to 10mm "D" Collet (Arbor for use on watchmaker's or jeweler's lathes to hold round gear cutter. Not for use on Sherline lathe) | .5 |
|
|
2096 |
CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to 8.0 mm WW Collet (Arbor for use on watchmaker's or jeweler's lathes to hold round gear cutter. Not for use on Sherline lathe) | .5 |
|
|
2100 |
3/4" COLLET POT CHUCK (Collet pot chucks are like small chucks custom turned to hold a particular part. The part is held in a depression turned in the surface of the pot chuck and does not go all the way through. Includes dowel pin to clamp on while turning to size.) | .05 |
|
|
2101 |
1" COLLET POT CHUCK (See 2100) | .05 |
|
|
2102 |
1-1/4" COLLET POT CHUCK (See 2100) | .05 |
|
|
2103 |
10mm 3/4" COLLET POT CHUCK (See 2100) | .15 |
|
|
2104 |
1Omm 1" COLLET POT CHUCK (See 2100) | .15 |
|
|
2105 |
10mm 1-1/4" COLLET POT CHUCK (See 2100) | .15 |
|
|
2106 |
LIVE CENTER-TO-8mm COLLET (A live center for watchmaker's or jeweler's lathes.) | .15 |
|
|
2107 |
LIVE CENTER-TO-10mm COLLET (A live center for watchmaker's or jeweler's lathes.) | .25 |
|
|
2110 |
W.R. SMITH WATCHMAKER'S T-REST (Used on Sherline lathes to support a hand-held "graver", a traditional watchmaker's tool. Turns Sherline lathe into a first class watch or clock maker's lathe. Designed by famed craftsman W.R. Smith. Graver-making instructions included.) | 1 |
|
|
2200 |
RADIUS CUTTING ATTACHMENT (For cutting ball ends, convex and concave radii on ends of parts and even complete balls) | 1 |
|
|
2250 |
QUICK CHANGE TOOL POST w/ 3 holders (Saves time when changing tools. Holders included for 1/4" cutter, round boring tool and cutoff tool. Cutting tools not included.) | 3 |
|
|
2251 |
QUICK-CHANGE TOOL PAST RISER (Now your Sherline quick-change tool post system can be used with the riser blocks in place when turning larger diameter parts) | 1.75 |
|
|
2256 |
RIGHT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel) | .15 |
|
|
2257 |
LEFT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel) | .15 |
|
|
2258 |
PAIR OF RIGHT- and LEFT-HAND 35° INSERT TOOL HOLDERS (Includes one 55° insert per holder) (Replacement inserts, P/N 7605) (Save $20 by buying both LH and RH tools together) | .25 |
|
|
|
2259 |
80° INSERT 3/8" ROUND BORING TOOL, 1/2" min. hole, carbide insert included (Use w/ P/N 7600 tool post) | .15 |
|
|
|
2260 |
55° INSERT 3/8" ROUND BORING TOOL, 3/4" min. hole, carbide insert included (Use w/ P/N 7600 tool post) | .15 |
|
|
|
2261 |
PAIR OF ABOVE 80° (P/N 2259) AND 55° (P/N 2260) 3/8" ROUND BORING TOOLS w/ inserts | .25 |
|
|
2280 |
1/4" QUICK-CHANGE TOOL BIT HOLDER (Incl. w/ 2250) | 1 |
|
|
2285 |
3/8" QUICK-CHANGE BORING TOOL HOLDER (Incl. w/ 2250) | 1 |
|
|
2290 |
QUICK-CHANGE CUTOFF TOOL HOLDER (Incl. w/ 2250) | 1 |
|
|
2295 |
CARBIDE INSERT HOLDER for QUICK-CHANGE TOOL POST | 1 |
|
|
3001 |
POWER FEED (120V.) (for 240V. see P/N 3011) (Single direction motor drives lathe leadscrew .9" per minute to provide smooth final cut on long parts. Not designed for use with thread cutting attachment.) | 5 |
|
|
3002 |
CUTOFF TOOL & HOLDER (for cutting off work piece from the raw stock from which it was turned. Often called a "parting tool".) | .25 |
|
|
3003 |
TWO-POSITION TOOL POST (Holds two 1/4" cutting tools for quicker tool changes) | .25 |
|
|
3004 |
KNURLING TOOL HOLDER (Makes knurled finishes. Includes one set of spiral knurls. Other sizes and patterns available) | .25 |
|
|
3005 |
1/4" SQ. HIGH SPEED STEEL TOOL BLANK (Sharpen yourself on a bench grinder for standard or custom-shaped tools) | .05 |
|
|
3006 |
CARBIDE TOOL SET (3 PC) (LH, RH, 60° THREADING) (Carbide tips are brazed to 1/4" tool shanks. For cutting hard materials) | .25 |
|
|
3007 |
HIGH SPEED STEEL TOOL SET (3 PC) (LH, RH, BORING) (Pre-sharpened to save you time. For cutting most materials) | .25 |
|
|
3008 |
TWO-POSITION TOOL POST, 5/16" - 3/8" (Holds 5/16" tool on one side, 3/8" on other side. Allows use of tools other than 1/4") | .25 |
|
|
3009 |
CUTTING TOOL HEIGHT GAUGE (Used to assure tool tip on resharpened tools is set to proper centerline height. Works with both regular or riser toolpost) | .5 |
|
|
3011 |
POWER FEED (240V.) (See P/N 3001) | 5 |
|
|
3012 |
HOLD-DOWN SET (Simple strap clamp set for clamping parts to table for milling. Includes 2 clamps, T-nuts and assorted length bolts) | .4 |
|
|
3013 |
STEP BLOCK HOLD-DOWN SET (This is a smaller version of the sets used on most full-size mills. Quicker to use than 3012 and holds larger parts. Stepped blocks interlock to adjust height quickly. Spare block included to be cut to custom sizes) | 1 |
|
|
3015 |
TOGGLE SWITCH DUST SEAL (Use to keep fine dust out of speed contorl on/off switch when cutting brass or wood) | .05 |
|
|
3016 |
CUTOFF TOOL REAR MOUNTING BLOCK (Allows 3002 cutoff tool to be mounted on "back" side of crosslide where it is out of the way and can be left in place for easy parting off. Cutoff blade mounts upside down for use in this position) | .15 |
|
|
3017 |
CROSSLIDE ACCESSORY PLATE (Strengthens and protects lathe table when used for milling with vertical milling column. Not for use during lathe operations as tool post height will be incorrect.) | 1 |
|
|
3018 |
REAR MOUNT CUTOFF TOOL AND HOLDER | .25 |
|
|
3020 |
SHERLINE "T" DRIVER (5/32" hex driver with T-handle adjusts majority of 10-32 screws on Sherline tool. Easy to find on your bench.) | .15 |
|
|
3021 |
CENTER DRILL SET (3 PC., #1, #2, #3 double-ended) (Center drills don't wander off center when starting holes. 60° tip makes proper hole to match dead or live center tips for turning between centers) | .05 |
|
|
3035 |
SPUR DRIVER (A quick way to drive wood parts when turning between centers.) | .25 |
|
|
3038 |
WOOD TOOL REST (3" & 5" REST) (Supports hand-held wood cutting tools for wood turning) | .75 |
|
|
3040 |
1/8" ARMATURE SUPPORT (Designed to hold 1/8" motor shafts for truing up copper armatures for highest performance. Often used for working on slot car motors) | .25 |
|
|
3047 |
EXTENDED WOOD TOOL REST SET (For use w/ 1291) (Like 3038 only with longer shafts to match height of headstock with riser block in place) | .75 |
|
|
3050 |
VERTICAL MILLING COLUMN (Metric P/N 3053) (Converts your lathe into a 3-axis mill in less than 30 seconds.) | 8 |
|
|
3052 |
FLY CUTTER (For quickly milling large, flat surfaces.) | .5 |
|
|
3054 |
BORING HEAD (For enlarging holes to a precise inside diameter, uses 3/8" round boring tools) | .5 |
|
|
3055 |
MORSE #1 BLANK (Turn on lathe and/or mill slots to make your own custom fly cutter, slitting saw holder or special tool holder) | .5 |
|
|
3056 |
T-NUTS, 10/32 (Set of 10) | .15 |
|
|
3057 |
ROCKER TOOL POST (Rocking insert with two screws allows adjustment of tool tip height for accurate turning. Eliminates shimming. Included on Model 4400/4410 lathes) | .5 |
|
|
3058 |
4-JAW HOLD DOWN SET (Two angle clamps with T-nuts to clamp 4-jaw vise to any position on mill table. Included with 3551 mill vise) | .15 |
|
|
3059 |
SLOW SPEED ATTACHMENT (For use on older lathes with AC/DC motor to provide more torque at low speeds. Not used on lathes with newer DC motor.) | .25 |
|
|
3060 |
MILLING COLLET SET (3 PC), (Metric P/N 3090) (1/8", 3/16", 1/4") (Milling collets have a #1 Morse taper and are pulled into the headstock with a drawbolt. They do not have a through hole like WW collets. They are used to hold specific size end mills or cutters.) | .15 |
|
|
3061 |
BORING TOOL—Max. Depth .600, Min. Hole 1/4") (Use w/ P/N 3054 boring head) | .15 |
|
|
3063 |
BORING TOOL—Max. Depth 1", Min. Hole 5/16" (Use with P/N 3054 boring head) | .15 |
|
|
3064 |
BORING TOOL—Max. Depth 1.5", Min. Hole 5/16" (Use w/ 3054 boring head) | .15 |
|
|
3065 |
SLITTING SAW HOLDER (Holds small, round sawblades for cutting thin slots) | .25 |
|
|
3072 |
1/4" DRILL CHUCK & DRAWBOLT (Jacobs chuck includes key, Included on 4000A lathes and 5400/2000-series mills) | .5 |
|
|
3073 |
3/8" DRILL CHUCK & DRAWBOLT (Jacobs chuck includes key, included on 4400A lathes) | .75 |
|
|
3075 |
5/16" END MILL HOLDER | .5 |
|
|
3076 |
6.0mm END MILL HOLDER | .5 |
|
|
3077 |
8.0mm END MILL HOLDER | .5 |
|
|
3078 |
10.0MM END MILL HOLDER (Most common size metric tool holder) | .5 |
|
|
3079 |
3/8" END MILL HOLDER (Most common size inch tool holder. 3/8" end mills are available from many sources and are, therefore, the least expensive and available in the largest selection.) | .5 |
|
|
6079 |
1/4" END MILL HOLDER (Holds end mills in 3080 set) | .5 |
|
|
6080 |
3/16" END MILL HOLDER | .5 |
|
|
6081 |
1/8" END MILL HOLDER | .5 |
|
|
3080 |
END MILL SET (1/4" SHK) (1/8", 3/16", 1/4") | .05 |
|
|
3087 |
3/32" MILL COLLET | .05 |
|
|
3089 |
5/32" MILL COLLET | .05 |
|
|
|
3090 |
3-PC. METRIC MILL COLLET SET w/ 3.0, 4.0 and 6.0 mm collets (See P/N 3060 for inch version set and description.) |
.15 |
|
|
3091 |
7/32" MILL COLLET | .05 |
|
|
3092 |
3.0MM MILL COLLET | .05 |
|
|
3093 |
4.0MM MILL COLLET | .05 |
|
|
3094 |
6.0MM MILL COLLET | .05 |
|
|
3095 |
1/8" MILL COLLET | .05 |
|
|
3096 |
3/16" MILL COLLET | .05 |
|
|
3097 |
1/4" MILL COLLET | .05 |
|
|
3098 |
MILL COLLET (Special Order .125 to .312) (Allow 3 weeks delivery) | .05 |
|
|
3100 |
THREAD-CUTTING ATTACHMENT (Being able to cut threads on your lathe frees you from the expense of purchasing a lot of expensive taps and dies for non-standard size threads. Cut just about any thread, inch or metric, using this set of change gears. Hand crank wheel included) | 3 |
|
|
3200 |
INDEXING ATTACHMENT (Indexes in 5° increments, uses rack gear to turn rotation into measurable linear movement for divisions other than 5° multiples. Includes base and tailstock.) | 8 |
|
|
3217 |
GEAR TOOTH CUTTER HOLDER & HSS BLANK (Grind gear shape into tool blank and use on mill in conjunction with indexing attachment or rotary table to cut your own gears.) | .5 |
|
|
3230 |
MILL ARBOR-7/8" DIA. (Short) (Holds round mill cutters) | .5 |
|
|
3231 |
MILL ARBOR-7/8" DIA. (Long) (Holds round mill cutters) | .5 |
|
|
3235 |
MILL ARBOR-1" DIA. (Short) (Holds round mill cutters) | .5 |
|
|
3236 |
MILL ARBOR-1" DIA. (Long) (Holds round mill cutters) | .5 |
|
|
| 3306 | STD. HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 2800 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 1400 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.) | 10 | |
|
| 3307 | 10,000 RPM HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 10,000 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 2200 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.) | 10 | |
|
3400 |
OVERSIZE HANDWHEEL (2.5" diameter for easier cranking) | .15 |
|
|
|
3404 |
Z-axis Wheel-handling. |
N/A |
|
|
3420 |
2" ADJUSTABLE ZERO HANDWHEEL (Mill Y-axis or lathe crosslide) (Metric P/N 3430) | .25 |
|
|
3440 |
2.5" ADJUSTABLE ZERO HANDWHEEL (Mill Y-axis or lathe leadscrew) (Metric P/N 3450) | .25 |
|
|
3460 |
2.5" ADJUSTABLE ZERO HANDWHEEL (W/Thrust & Bearing Set for Mill Z-axis) (Metric P/N 3465) | .25 |
|
|
3480 |
VERTICAL MILLING COLUMN W/ADJ. HANDWHEEL (Metric P/N 3485) (Turns lathe into a mill in less than 30 seconds. Normally used with 4500 or 4400 lathes to match adj. Zero handwheels) | 8 |
|
|
3500 |
ROTARY COLUMN ATTACHMENT (Allows mill column to be swung up to 90° to either side for angled drilling) | 1.75 |
|
|
3551 |
MILLING VISE (Holds work for milling. Looks similar to a drill press vise, but jaw pulls down and in to keep parts from lifting during milling. Precise jaws and body can be squared up with table.) | 2.5 |
|
|
3559 |
90° ANGLE PLATE (Mounts parts 90° to table for milling) | 4 |
|
|
3560 |
MILL TOOLING PLATE (Protects mill table, pre-drilled hole pattern makes it easy to clamp parts, mount mill vise or rotary table to mill.) | 2.5 |
|
|
3570 |
ROTATING MILL VISE BASE (Holds mill vise while allowing it to be rotated 360° using laser engraved scale for angle reference) | 1 |
|
|
3575 |
ROTATING MILL VISE BASE AND MILL VISE (P/N 3551) (Save by buying vise and base at same time) | 2.5 |
|
|
3580 |
MULTI-DIRECTION DELUXE VERTICAL MILLING COLUMN (Turns your lathe into an 8-direction mill in 30 seconds) | 10 |
|
|
3585 |
MULTI-DIRECTION DELUXE VERT. MILLING COLUMN (Metric) | 10 |
|
|
3700 |
4" PRECISION ROTARY TABLE (72:1 worm gear divides a circle into 3600 parts without interpolation. Used for indexing radial hole patterns or milling radii or indexed flats. Used on 3701 or 3750 to index for cutting gear teeth. A mill with a rotary table is an extremely potent combination, make virtually any part possible, with size being the only limitation) | 8 |
|
|
3700-CNC |
4" PRECISION ROTARY TABLE, CNC-READY (Includes stepper motor mount ready for application of your own stepper motor and CNC controls. Handwheel also included) |
8 |
|
|
3701 |
RIGHT ANGLE ATTACHMENT (For use with P/N 3700) (Mounts rotary table perpendicular to mill table) | 3 |
|
|
3702 |
RIGHT ANGLE ADJUSTABLE TAILSTOCK (For use with P/N 3700) (Aligns with center of rotary table when mounted on 3701. Supports arbor shaft used to hold gear blanks when cutting teeth) | 2 |
|
|
|
3711 |
14 mm to 3/8-16 ADAPTER (Allows Chuck with 14mm thread to be mounted to Sherline rotary table P/N 3700) NEW 10/01 | .25 | |
|
3750 |
TILTING ANGLE TABLE (Mount part, mill vise, chucks or rotary table to mill any angle from 0° to 90°. In 90° position, holds rotary table at same height as 3701, eliminating the need for that part) | 2.5 |
|
|
4017U |
MILL SADDLE LOCKING LEVER UPGRADE (Allows Z-axis leadscrew to be locked with a lever on the leadscrew instead of tightening a screw with a hex wrench. Standard on all mills after 1998) (Metric P/N 4117U) | .5 |
|
|
4150 |
15" LATHE VINYL COVER (Protect your 4000-series lathe from dust and grit) | .25 |
|
|
4151 |
24" LATHE VINYL DUST COVER (Protect your 4400-series lathe from dust and grit) | .25 |
|
|
4335 |
10,000 RPM PULLEY KIT (The set includes pulleys and new motor standoffs. You use your existing motor, drive belt and all other hardware. A second pulley position offers a maximum of 2200 RPM, which is similar to the stock pulley set for jobs requiring more power and less RPM. The conversion takes about 10 minutes) | N/A |
|
|
4360 |
CHIP GUARD (Clear shield contains flying chips. Pivots out of the way when not needed. Not a substitute for safety glasses) | .5 |
|
|
5150 |
MILL VINYL COVER (Protects your 5000-series and 5400-series mill from dust and grit) | .25 |
|
|
5151 |
MILL VINYL COVER (Protects your 2000-series mill from dust and grit) | .25 |
|
|
5200 |
XY BASE (10") (Inch) (Add a 3050 vertical milling column and the motor/speed control from your lathe and you have a model 5000 mill) |
19 |
|
|
5201 |
XYZ BASE (10") (Inch) (Add the motor/speed control from your lathe and you have a model 5000 mill) |
26 |
|
|
5210 |
XY BASE (10") (Metric) (Add a 3053 vertical milling column and the motor/speed control from your lathe and you have a model 5100 mill) | 19 |
|
|
5211 |
XYZ BASE (10") (Metric) (Add the motor/speed control from you lathe and you have a model 5100 mill) |
26 |
|
|
5220 |
XY BASE (10") W/ ADJUST. HANDWHEELS (Metric P/N 5225) (Add a vertical milling column with adjustable handwheels and the motor/speed control from your lathe and you have a complete model 5500/5510 mill) |
19 |
|
|
5230 |
XYZ BASE (10" W/ ADJUST. HANDWHEELS (Metric P/N 5235) (Add the motor/speed control from your lathe and you have a complete model 5500/5510 mill) |
26 |
|
|
5300 |
HOME MACHINIST'S HANDBOOK by Doug Briney (275 pages, B/W, uses Sherline tools in all the setup examples, project plans included) | 2 |
|
|
5301 |
TABLETOP MACHINING by Joe Martin (The ultimate miniature machining book by Sherline's owner. All color, 8-1/2 x 11, 400+ photos, 200+ illustrations. Second printing, 9/99) |
3 |
|
|
5325 |
SHERLINE TOOLS & ACCESSORIES CATALOG, 6th Edition (48-page color catalog shows tools and accessories plus tells briefly how each is used. Current price lists enclosed.) | .5 |
|
|
5326 |
SHERLINE ASSEMBLY AND INSTRUCTION GUIDE, 4th Edition (44-page color instruction book included with new machines. A good basic course in machining) | .5 |
|
|
5327 |
SHERLINE SHOP GUIDE (144 pages, B/W, 8.5 x 11" perfect bound book incorporates illustrated instructions from all of Sherline's major accessories into one volume.) | 3 |
|
|
5328 |
STEAM ENGINE VIDEO by Rudy Kouhoupt (VHS, 3 Hrs., includes materials list and printed plans for a steam engine. Video takes you through every setup from start to finish.) | 2 |
|
|
5329 |
SHOP SECRETS—USING MEASURING TOOLS by Mike Rehmus (VHS, 2 hrs., tells you how each measuring tool used in machining is used and cared for. Very professionally produced. Includes promo for NAMES show too) | 1 |
|
|
5330 |
SAFETY GLASSES (A MUST in every shop. Get them from us or get them from someone else, but don't cut metal without them! These are good quality and comfortable.) | .25 |
|
|
5401 |
DELUXE XY BASE w/ 12" Base and Adjustable Handwheels (Metric P/N 5411) (Add a 3480 vertical milling column and the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.) |
21 |
|
|
5420 |
DELUXE XYZ BASE w/ 12" Base and Adjustable Handwheels (Metric P/N 5430) (Add the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.) |
27 |
|
|
5600 |
Model 2000 8-DIRECTION MILL XY BASE (metric P/N 5610) (Add a multi-direction vertical milling column and the motor/speed control from your lathe and you have a complete model 2000 mill.) |
22 |
|
|
5625 |
Model 2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630) (Add the motor/speed control from your lathe and you have a complete model 2000 mill.) |
34 |
|
|
5650 |
8-DIRECTION UPGRADE for all existing SHERLINE MILLS (metric P/N 5660) (A multi-direction milling column and an offset base brings your existing mill up to the capabilities of a model 2000 mill.) | 9 |
|
|
5680 |
8-DIRECTION UPGRADE for LATHE VERTICAL MILLING COLUMN (metric P/N 5685) (Turns your lathe/vertical milling column combination into an 8-direction mill.) | 9 |
|
|
6079 |
1/4" END MILL HOLDER (Holds end mills in 3080 set) | .5 |
|
|
6080 |
3/16" END MILL HOLDER | .5 |
|
|
6081 |
1/8" END MILL HOLDER | .5 |
|
|
6100 |
HORIZONTAL MILLING CONVERSION | 11 |
|
|
6101 |
COLUMN CONVERSION (To optimize the horizontal conversion, P/N 6100, the mill column should be reworked to allow for the best set up. Contact SHERLINE for information.) | 8 |
|
|
6700 |
CNC UPGRADE KIT, 5000 OR 5400 MILL (Metric P/N 6710) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) | 2.5 |
|
|
6705 |
CNC UPGRADE KIT, 2000 MILL (Metric P/N 6715) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) | 2.5 |
|
|
67127 |
STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 100+ oz-in stall torque, pre-wired with plug for use with Sherline rotary or linear controller, flats pre-machined for Sherline coupler and handwheel set screws. |
1 |
|
|
67129 |
STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 100+ oz-in stall torque, with raw six-wire lead, no flats on motor shafts (For use on non-Sherline mounts.) |
1 |
|
|
67130 |
STEPPER MOTOR, 2-amp, #23 Frame, dual shaft, 100+ oz-in stall torque, with raw six-wire lead, flats pre-machined onto motor shaft (For use with Sherline motor mount, coupler and handwheel.) |
1 |
|
|
6720 |
CNC UPGRADE KIT, 4000 or 4500 LATHE (Metric P/N 6725) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) | 2 |
|
|
6730 |
CNC UPGRADE KIT, 4400 LATHE (Metric P/N 6735) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) | 2 |
|
|
6740 |
CNC Upgrade Kit, Z-axis only, 5000 Mill (1.5 lb) (Metric P/N 6745) | 1.5 | |
|
6750 |
CNC Upgrade Kit, Z-axis only, 2000 Mill (1.5 lb) (Metric P/N 6755) | 1.5 | |
|
6780 |
CNC UPGRADE KIT, leadscrew axis only, 4000/4500-series lathes (Metric P/N 6785 | 1 |
|
|
6790 |
CNC UPGRADE KIT, leadscrew axis only, 4400-series lathes (Metric P/N 6795) | 1 |
|
|
7505 |
SET OF MACHINIST'S PARALLELS (Sets of two parallel bars in five different sizes sized for miniature machine tools. Used to support work a known distance above and parallel to the table.) | .25 |
|
|
7600 |
3/8" INSERT HOLDER TOOL POST (Has side slot to hold 3/8" shank cutting tool holders plus a 3/8" round hole to hold round boring bars.) | .25 |
|
|
7610 |
55° NEGATIVE RAKE INSERT HOLDER w/ insert (Holds carbide tips for cutting hard materials like stainless steel. 5° angle provides negative clearance for the cutter, which is supported all the way down to the table for rigidity.) | .25 |
|
|
7612 |
REPLACEMENT 4-SIDED CARBIDE INSERT TOOL (for 7610) | .05 |
|
|
7620 |
SINGLE FLUTE INSERT FLY CUTTER (Carbide insert cuts hard materials. Also is a good compromise between a fly cutter and an end mill, because it will cut a 1-1/8" wide path while still being able to cut right up to a shoulder.) | .5 |
|
|
7622 |
REPLACEMENT 2-SIDED CARBIDE TIP (for 7620) | .05 |
|
|
8100 |
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR MILL (inch) (Metric P/N 8160) (Reads table position to .0005", electronic compensation for backlash) | 3 |
|
|
8200 |
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE (inch) (Metric P/N 8260) (Reads table position to .0005", electronic compensation for backlash) | 2.5 |
|
|
8210 |
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE and VERTICAL MILLING COLUMN (Inch) (Metric P/N 8215) (Reads table position to .0005", electronic compensation for backlash) | 3 |
|
|
8220 |
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE without READOUT BOX (For those who already have a Mill DRO package) (Inch) (Metric P/N 8225) (Reads table position to .0005", electronic compensation for backlash) | 2 |
|
|
8240 |
Z-AXIS VERTICAL MILLING COLUMN DIGITAL READOUT HANDWHEEL PACKAGE (Inch) (Metric P/N 8245) (Adds third readout for those who bought 2-axis DRO and later add a vertical milling column.) | .5 |
|
|
8700 |
CNC ROTARY INDEXER w/ CONTROLLER, STEPPER MOTOR, MOUNT, POWER SUPPLY, CABLES, 4" ROTARY TABLE AND HOLD-DOWNS (Inch) (Stand-alone system with its own built-in computer is user programmable. A computer controlled stepper motor indexes the rotary table to within ±.006°. Can be daisy-chained with linear controller to do gear cutting.) |
17 |
|
|
| 8701 | CNC ROTARY TABLE RISER PLATE (On the 3700-CNC and 8700 CNC rotary tables, the bottom of the stepper motor mount extends slightly below the bottom surface of the table. On Sherline mills, the mount overhangs the side of the table so this is not a problem. On larger mills or flat table applications a riser plate is needed so that the stepper motor clears the table surface.) | 2 | |
|
| 8730 | CNC ROTARY TABLE WITH STEPPER MOTOR (Stepper motor plugs into 4th axis cable of 8760 driver box or Sherline 8540 or 8020 CNC system to act as 4th axis. Includes prewired plug. | 10 | |
|
| 8760 | CNC 4-AXIS DRIVER BOX (Includes 4 cables for X, Y, Z and A (Rotary) axes, power supply and parallel cable for attachment to computer's printer port. Linux OS and EMC 4-axis softare also included on two CD's. Buy or upgrade a CNC-ready Sherline machine, buy the needed P/N 67127 stepper motors, plug in and attach to your computer with Linux/EMC installed and you have the duplicate of a complete Sherline CNC system. NOTE: one hour of free technical support provided with Sherline CNC system is NOT provided when driver box is purchased separately.) | 7 | |
|
8800 |
CNC LINEAR CONTROLLER w/ STEPPER MOTOR (Inch) (Stepper motor bolts onto Sherline CNC-ready stepper motor mounts. Controller drives stepper motor to move any axis on lathe or mill. From .0005" to 9.9995". Includes power supply and cable. Daisy-chainable.) | 5 |
|
|
8850
|
CNC MILL POWER FEED (X- or Y-AXIS) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES AND POWER SUPPLY (Replaces handwheel on X- or Y-axis of mill with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move table from .0005" to 9.9995". Includes drill block for locating mounting holes. Daisy chainable) |
5
|
|
|
| 8860 | CNC MILL POWER FEED (Z-AXIS, 5000/5400 MILLS) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEADSCREW (Replaces handwheel on Z-axis of mill with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move Z-axis in programmable .0005" increments up to full length of travel. Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only |
7 |
|
|
| 8865 | CNC MILL POWER FEED (Z-AXIS, 2000 MILL) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEADSCREW (See description for 8860 above) | 7 | |
|
| 8870 | CNC LATHE LEADSCREW POWER FEED, 4000/4500 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 15" LEADSCREW (Replaces handwheel on long leadscrew of lathe with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move the saddle from .0005 to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only | 7 | |
|
|
8880
|
CNC LATHE LEADSCREW POWER FEED, 4400 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 24" LEADSCREW (See description for 8870 above.) |
7
|
|
|
| 116000 | WW COLLET BLANK, Large Head | .05 | |
|
| 116001 | 1/64" WW COLLET | .05 | |
|
| 116002 | 1/32" WW COLLET | .05 | |
|
| 116003 | 3/64" WW COLLET | .05 | |
|
| 116004 through 116020 | WW COLLETS from size 1/16" to 5/16" by 64ths. | .05 | |
|
| 117801 | .1 mm WW COLLET | .05 | |
|
| 117802 | .2 mm WW COLLET | .05 | |
|
| 117803 through 117808 | WW COLLETS from size .3mm through .8 mm by .1 mm increments. | .05 | |
|
| 117809 through 117814 | WW COLLETS from size .9mm through 1.4 mm by .1 mm increments. | .05 | |
|
| 117815 through 117880 | WW COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments. | .05 | $16.15 | |
